Mews Completion

Here are the pictures with little comment

 Food chute and pass through window for cross ventilation.

 

Infra red color camera connected to DVR and monitor in house.

 

 Electricity to the shed.

 

 Ready for switches and lights.

 

Inspection items, leash, bath pan, jesses, anklet materials, and swivels. Interlocking foam pads on concrete floor to protect talons. Walls and ceiling covered with Coroplast (imagine plastic cardboard, like political signs.) Smooth and power washable. 

 

Food chute platform. Coroplast is easy to clean.

 

 

Roof completed.

 

Vent holes for air movement in each rafter bay.

 Installing light baffles on shutters.

 

 Light tight shutters

 

 1 inch foam on top of sheathing and tar paper, covered by aluminum.

 

Painted, soffit and facia. All gaps foamed.

Mews building

Here we go, the mews.

 Brett

End of the first day.

Second day progress

Hardiboard siding

Rafters and sheathing

 End of second day

Mews windows

With the pad coated in a garage floor epoxy, I moved to constructing my barred windows.

 First, I decided I needed enough space to have bars, then mosquito screen, then a frame on the inside of the frame to block all light. I also wanted the screen set away from the bars so that the bird won't catch it's talons. So I went with 2x6.

I decided to use 3/4" EMT conduit for the bars. I put the hole centers 1 inch from the edge and 1 1/2" from each other. I went with this spacing so it would work with a smaller bird, like a Merlin or Sharp shin, which are in the scrub jay or magpie size range.

 I tried a couple different approaches, but settled on drilling through the top board, then screwing top and bottom together and using the top as a guide. Using a 3/4" auger bit and a drill press, I set up a fence to keep the holes straight and drilled all the way through the top, but only half way through the bottom plate.

 I cut the uprights to give me an overall dimension of 2'x3'.

I taped the conduit into 7 piece bundles, and using a special metal blade, cut them 1'11". I used 14 8' conduit, 21 2' bars per window.

Here they are assembled. Next we painted them.

I now need to add the mosquito screen.

Framing Bird House/ Pigeon Coop

My step-dad came over and helped me frame up the dividing walls between the bird area and the storage space.

Then I cut in the holes for the vents and the window. I can't decide whether to make the cut out piece into a door or a panel, to set in the holes during really cold weather ( 10's and 20's.) If I go with a panel I will still have to figure out a secure way to hold it in.

The West side will be for starlings and sparrows, the east side will be for culled pigeons from local pigeon breeders. I anticipate having up to 20 pigeons at a time max in a 4'x4'x7' enclosure. We'll see how many starlings and English sparrows we catch. This is a picture of the starling side.

Starling side exterior. I still need to cut out the pigeon side but waited because I ran out of 1/2" hardware cloth.

The next day my step-dad came back to help me get the floors and dividers framed. The floor will be rabbit wire elevated 18" above the floor, so that I can clean up and the birds will stay clean.

 Wall covered and door added.

 This is the clever handle/ lock he came up with.

I'll need to add a little door to each side and a coat of paint to seal the wood, then it'll be time to wire it up.

Next day I added perches in both sides.

 Then we gave them a coating of primer. Next will be some nest boxes on the pigeon side, then access doors, and finally wire and floor coatings.

 

 Starling nesting cans. We'll see if they will use these like the nesting box. The idea is they go in the can to hide, I slide a piece of sheet metal keeping them in the can. Easier than using a net (I hope.)

 

Access door and flap, which uses small magnets to keep closed. Pine shavings to keep clean and smelling good.

Bird House and Mews begin

Since I will be building my mews on the existing concrete pad, I wanted to prep the concrete so that it won't absorb moisture. I power washed the concrete until it was very clean, then I gave it a couple coats of epoxy garage floor sealant.

I'm putting it on the north side of my house to keep it as cool as possible in the summer.

I also just had a shed built, and I figured it would cost less to have them add 4 feet versus building a separate structure. It's now 10'x14', and I'll use the last 4 feet for a coop for about 20 pigeons on one side and the other side for starlings and sparrows. I'm planning on several vents on each side and a 2'x3' windows in each enclosure that will have a hinged cover for colder weather.

I already sealed the floor with some left over epoxy sealant.

Here's what ten tons of gravel look like on a playground.

You can see the board marking off the last 4 feet of the shed. My dad is pointing it out. Don't worry, I finished by adding a couple more feet of gravel on this west side.

You can also see the doors, window frames, and bars for my mews.